PRODUCTSOLIVE-OIL EXTRACTION PLANTS  - OLIVE'S, TREATMENT, CRASHING - MALAXING 


 MALAXER  Next Product


MALAXER The malaxers are basically combinations of malaxing baths of U shape and aprox. capacity of 1.000 lit of olive-paste each (main version). The internal dimensions of the baths are:  length 2.500 mm, width 650 mm and height (max semi-cylindrical) 680 mm. By using as base the horizontal (single-stage) malaxer (overall height 1.050 mm), we can built two-stage malaxer (overall height 1.800 mm), or three-stage one (overall height 2.550 mm) expanding the primary malaxing volume and the capacity of the plant. All the baths are totally de-assembled units and in any case the selected type of crusher can be placed on the top of the upper bath or in case of three-stage malaxer also on the backside, at low-height position.                
All the internal parts of the malaxers coming in contact with the product are made from stainless steel (INOX type AISI-304), and also the external ones in Extra-Inox type. The baths are double-wall type (effective space 25 mm) for the circulation of the warm water, specially tied one each other and of course all the malaxers have 3-way mixing valve and thermometer for the regulation of the operating temperature. In case of two-stage and three-stage set of malaxers, in the price is also included and installed-connected on the machine one circulating pump 2” / 3 HP ( save installation time and cost).                                            
The mixing conveyor is a solid construction, also made from AISI-304 material, and is specially designed for quick malaxing and transporting times. The pitch of the conveyor (continuous blade) is 200 mm and has 3 triangle flights (thickness 3 mm) with holes per pitch. Axel Φ 60,5 mm INOX tube with end enforcement.                                    
Each bath has at the bottom a wide outlet either for emptying either to adapt directly a monopump (NE-40 or NE-50) for feeding the decanter, without the use of extra feeder for the monopump. The conveyors are driven by axial transmission geared motor, through gear-plates and heavy transmission chain. Power transmission from the down bath step by step towards the above stages. The conveyor is mounted on double-rolled bearings placed in external special bearing housing and protected by two double ceilings.  

TECHNICAL DATA

TRANSMISSION  OF  MOTION

Single 1000 LIT - Power [KW]

2,2

2000 LIT - Power [KW]

2 x 2,2

3000 LIT - Power [KW]

3 x 2,2

Mounting type

B5

Protection

IP-44

Oper. Voltage [V]

380

Frequency [Hz]

50

Power transmission

Axial

 

CONSTRUCTION  MATERIAL

Internal surfaces (in contact with paste) [DIN]

1.4301

External surfaces EXTRA-INOX [DIN]

1.4301

Conveyor - Screw-bolts, nuts [DIN]

1.4301

Rest external surfaces – frame – covers

St-37

 

Feeding screw-pump

Power [KW]

1,5

Construction Material:

 

Transmission & intermediate shaft [DIN]

1.4301

Rotor [DIN]

1.4404

Ext. housing [DIN]

1.4301

Stator

Food grade rubber

Cross section (outlet) [in]

2''

 

INVERTER

 

Water – circulation  pump

Power [KW]

2,2

Motor’s poles no

2

Motor’s mounting type

Β3 / B5

Protection

IP-44

Oper. Voltage [V]

380

Frequency [Hz]

50

Cross section (inlet – outlet) [in]

2''

Pressure max. [Atm]

0,8

Housing-impeller

Cast-iron

Shaft [DIN]

1.4301

Power transmission - Horizontal

Axial – coupling


Copyright 2008-2018 callis.gr / All rights reserved. DESIGNED, CREATED & HOSTED BY = DAZZ