PRODUCTSOLIVE-OIL EXTRACTION PLANTS  - OLIVE OIL EXTRACTION AND CLEANING 


 SEPARATOR & CLARIFIER  Next Product


SEPARATOR & CLARIFIER  The automatic discharge centrifugal separator is in function for clarification and de-watering of vegetable oils, for oil finishing and recovery of oils from waste-water. It is suitable both for continuous extraction plants (by the use of decanter) and for traditional olive-oil mills.                    
It separates mixtures of liquids with different specific gravity with simultaneous removal of the solids, discharged under gravity. The separator is equipped with a disc-type bowl and a movable inner sliding piston for automatic de-sludging. The product is fed inside, without pressure, through open-type covers and separation takes place in the disc stack. By inserting regulating rings with different inner diameters, the separation zone in the bowl can be adapted to optimum results (suit to specific gravity of the liquid products).  The separated solids slide out  to holding space and are de-sludged periodically through ports instantaneously at full bowl speed (the sliding piston is lowered hydraulically after operator’s command). The proper timing of solids discharge also effects in an additional cleaning result.                                            
The frame is a heavy steel construction (not cast-iron), special inner coated with paint, equipped with see-through inspection port, oil level sight glass, brakes and bowl lock screws. Electronically controlled motorization (to the bowl spindle via worm wheel gear) for smooth start up and continuous accurate operation by the use of inverter. All bearings and the bronze alloy gear are splash lubricated from a central oil bath.                    
The non-automatic discharge (manual cleaning) separator / clarifier, is built at the same principles, by the difference of de-sludging operation and sliding piston, which does not exist.

 

TECHNICAL DATA

CONSTRUCTION  MATERIAL

Bowl [DIN]

1.4404 / 1.4301

Sliding piston [DIN]

1.4404 / 1.4301

Discs [DIN]

1.4404 / 1.4301

Lock nut

St-42

Covers - liquid outlets [DIN]

1.4301

Frame

St-37

 

DRIVE  MOTOR

Power (depending on type) [KW]

4 ? 7,5

Poles no

4

Mounting type

Β5

Protection

ΙΡ 44

Oper. Voltage [V]

380

Frequency [Hz]

50

Mounting position

INVERTER

 

OPERATIONAL FEATURES

Rotating speed, max [rpm]

6.700

Lubrication (bearings - gears)

Oil


Copyright 2008-2018 callis.gr / All rights reserved. DESIGNED, CREATED & HOSTED BY = DAZZ